AUDIO CONNECTION SOCKET

Mechanism for connecting a single speaker, with claw fixing. A finishing set in a colour of your choice must be ordered separately.

Base for single speaker socket, claw fixing.

• Degree of protection: IP41 protection for the entire mechanism, the trim and the cover plate
• Impact resistance: The combination of a mechanism, a trim and a cover plate has an impact resistance of IK06
• Base material

polycarbonate + dark gray asa

• Mounting frame
  • metal frame thickness: 1 mm
  • galvanized and satin-finished on all sides, also on the cut sides after cutting
  • with 4 notches with a 7 mm screw housing
  • with 4 screw pockets (indicated with a screw symbol) with a diameter of 3 mm for panel mounting
• Recessed depth: 14.5 mm
• Fixing method
  • easy fixing in a flush-mounting box with notches
  • with claws that open by screwing in screws with a mixed screw head (Pz1 or 1 x 5 mm notch) for fixing in a flush-mounting box with notches
  • claws with a meshing depth of 31 mm
  • The claws are unlocked with a screwdriver
• Center distance
  • simple and quick assembly of one or more mechanisms thanks to indications (chalk line, laser, etc.) of the center distance of the housing
  • vertical adjustment for a center distance of 60 mm by sliding several bases on top of each other. They lock automatically
  • vertical adjustment for a center distance of 71 mm using preformed tabs. By bending these tabs downwards by a distance of 1 mm, they rest perfectly on the lower point and the center distance of 71 mm is guaranteed
  • Quick and perfect horizontal adjustment of multiple bases thanks to the dovetails bent upwards on the left and right
  • The upward folded edges on the outer face of the base as well as the inward bending provide greater robustness
• Mounting edge: The flush-mounting bracket is equipped at the top and bottom with a dark grey plastic mounting edge. This edge is made of PC+ASA and is joined to the flush-mounting bracket by fusion. The corners of these two mounting edges are equipped with rectangular openings (7.9 x 1.5 mm), each of which contains a multi-position safety hook. The 4 rectangular openings ensure that the cover plate can always be fixed flat against the wall in the event of sloppy plastering thanks to the safety hooks. This system works in two directions: if the flush-mounting box protrudes from the plasterwork, the multi-position safety hooks compensate for a play of 1 to 1.2 mm; if the flush-mounting box is sunk too deeply into the plasterwork, the safety hooks can compensate for a play of up to 1.8 mm. The mounting edges are also provided with 4 round openings which ensure the correct positioning of the cover plate in relation to the trim.
• Wired connection
  • Mixed screw head connection terminals (Pz1-notch 0.85 x 5 mm)
  • the screwdriver does not slip off the screw head thanks to a screwdriver guide
• Wire capacity
  • The two connection terminals on the rear are located at the bottom and each have a max. capacity of 6 mm²
  • The red connection terminal is located on the front right of the base and the connection terminal on the left (a wire of max. 4 mm² can be connected to it).
• Ambient temperature: -5 – +40 °C
• Marking: CE

DELIVERY AND RETURN

Belgium 2-3 days
Shipping costs vary depending on the country. You can see the total cost of shipping in your shopping cart or during the checkout process.

Shipping time
24 Hours
If an item does not fully meet your expectations, simply return it to us within 14 days of the transaction. Please read the terms and conditions to determine whether your item is eligible for return or not.

For more information please consult
our return conditions.

Payment Methods:
BEBRICO accepts the following payment methods for online purchases: Paypal, Bancontact, Visa, Mastercard, American Express.